The daily maintenance of the automatic dispenser directly affects the service life of the automatic dispenser. The daily work of the automatic dispenser maintenance has a great influence on the service life of the automatic dispenser, including the smoothness during normal use. The following are the daily maintenance procedures of the automatic dispenser:

1, replace the plastic species, need to clean the pipeline. At this time, close the feed valve first, open the discharge valve, discharge the remaining glue from the plastic bucket, close the discharge valve, open the feed valve, pour the cleaning solvent into the glue storage barrel, activate the body, and press the solvent according to the usual operation mode. Rinse out.

2. The air pressure is not normal and water vapor is found. Please check whether the air pressure in the pressure regulator filter is abnormal or whether the air pressure source is abnormal. Before the glue is used in large quantities, please use a small amount of trials to master the use of the product, so as to avoid mistakes. When the test is no problem, then double-drop glue machine or double-liquid glue machine for mass production; The vacuum system is used to vacuum the defoaming treatment of the glue to eliminate bubbles generated during the stirring process, or to stand for 10-20 minutes before use, so that the bubbles generated during mixing are eliminated in time, and the amount of glue mixed together is more.

3. Please clean the machine part regularly to increase the service life. The more glue that is mixed together, the faster the reaction and the faster the curing speed. Therefore, it is necessary to use a reasonable amount of glue according to the actual production conditions, otherwise the glue will be wasted. Exclude accidents and increase production efficiency. Liquid control technology and dispensing equipment are now widely used in various fields of production in modern industries.

4. When the machine is disabled for a long time, it should be unplugged. This will not only extend the life of the machine but also save a lot of electricity. With the needs of the ever-changing industrial development, liquid control technology and dispensing equipment are also continuously developed to ultra-high precision control and diversification and specialization.

Note: After each use, do a good job of cleaning, wipe the place where you can see, wipe with alcohol, the best part of the regular movement of oil or butter, keep it lubricated, if you do not have to use plastic for a long time Otherwise, solidified in the LED automatic dispenser, but also money to clean up, very troublesome.