What is a smart screw feeder system

     The feeding system in the screw machine is one of the important parts. What is the feeding system, how is the structure of the feeding system, and what is the workflow of the feeding system? Let's go to a comprehensive and in-depth understanding of the important parts of this screw machine:

     The supply system of the automatic screw machine mainly includes a hopper, a vibrating plate, a material distribution system, and a trachea. It can also be simply considered that the screw is supplied through a process screw, such as a vibrating plate feed, a hook-disc feed, a drum feed, a screw feeder, etc., and is then guided through the guide rail in orderly and orderly. Finally enter the trachea, air pressure will be sent to the lock screw, which is the basic flow of the screw supply system.

     From the working principle of the automatic screwing machine, the process can be divided into three parts, namely (supply) supply system, lock payment system, and blanking system (or manual operation). The subject of this paper is how to automatically supply the screw of the screw machine, that is, the supply system of the automatic screw machine, also called the feeding system.

    Automatically screwing the machine divides the entire control system into three sub-control systems: automatic feeding, lock-payment system, and transmission. The entire automated assembly line adopts a distributed control system with high reliability, good real-time performance, and strong control functions, facilitating centralized management. With decentralized control, control loads, functions, and dangers can be relatively dispersed and structured.

    In the modern control system, the small-scale control system applied in the industry mainly has two kinds of one-chip computer and programmable controller. In general, the automatic screw machine mainly adopts the sequential control system.

    Sequential control system is that when the work instruction is issued, the automatic screw machine can automatically and sequentially complete a series of operations to achieve the control. According to the order of the control unit instructions, the sequence control unit can be divided into: 1 time sequence control Unit; 2 logical sequence control unit; 3 conditional sequence control unit.

The workflow of the automatic screw feeder system is as follows:

1 When the automatic screw machine lock pays one screw, the incoming material sensing system B and the incoming material sensing system A transmit the signal to the signal receiver;

2 The signal receiver sends the instruction to the feeding sensor, and the feeding sensor starts to send the screw of the hopper out, passing the qualified screw of the incoming material detector (automatically screening bad screw);

3 one is sent to the nail delivery tube, and the screw is sent from the nail delivery tube to the batch mouth by air pressure. Waiting for the lock, when the lock finishes one screw, the incoming material sensor signals the signal again. Receiver, so that it has been cycled. Repeated automatic feeding;

4 When the screw of the automatic screw machine lock machine can no longer supply screws, after the feed sensor receives this signal, an audible and visual alarm is issued by the alarm device, which is the lack of material alarm function.

    Choosing a good feeding system is very important, because its performance will directly affect the locking efficiency of the automatic screw machine, and then affect the entire company's production efficiency. After reading the above description of the feeding system for the screw machine, I hope everyone has a better understanding of it and a better understanding of the automatic locking screw machine. The era of automation professional do automatic screw machine, the supply system of the quality of the lever.