Maintenance method of automatic soldering machine

1. Do not understand the personnel of the electronic machine, do not open the machine privately, to avoid the operation mistakes damage the machine.

2. Do not put salt, acid, alkali, or water on the soldering machine to avoid damage to the machine or short circuit of the machine and damage the machine.

3, the machine's internal integrated circuit board, can not throw the machine and use hot iron plastic shell.

4, before each work, need to use sponge to remove the excess iron dross and rosin residues on the iron head, and then remove the electricity, to the time when the temperature is low, add tin to the iron head for maintenance.

5, before going off work every day need to clean the dust and debris on the machine with a clean cloth.

6, automatic soldering machine tin device gear needs regular (2 months or so) plus lubrication, if the gear or blade wear, you need to change;

7. Regularly clean the tin slag in the cleaning box;

8. Regularly check whether the body screws are slippery or loose;

9. Regularly clean the rosin on the solder head;

10, regular inspection of the solder head on the thermocouple is loss, if the loss of temperature display display temperature will be abnormal, you need to follow the heat transfer couple (consumables).

11. Don't forcibly pull the parts on the soldering machine.

12. The power plug must be removed when the machine is not in use, so as not to damage the machine for too long.