Automatic screw machine is a typical automatic production equipment, but sometimes encountered in the production process card machine, which will affect the production efficiency, how to avoid these card machines, we must understand how these card machine phenomenon is caused, can Determine whether it is a human operation problem or a machine equipment problem, so as to reduce costs.

        Most of these card machine problems are caused by defective screws. However, the problems with these screws are generally caused by a flower head or a sliding tooth. This has two causes.

        The first is the design problem of the automatic screw machine itself.

        The second is the automatic screw machine manufacturers to solve the above-mentioned special screws to increase all automatic screw machine channels, including electric batch nozzle, electric nose nozzle too large diameter is the biggest cause of floating teeth, flower head, which lead to automatic playing automatically The screw machine itself has important issues, so manufacturers have made this a new area and have also accelerated the performance of automatic screwing machines.

       Screw quality problems are mainly caused by poor screw quality and changes in machine design dimensions. There are problems with the machine itself, such as the materials used, the process, and the brand used in the electronic parts. At the time, our core components are best imported, so that the stability of the machine can be guaranteed and the brand of the machine can be better.

   Excluding three common automatic screw machine failures:

    The first measure: If you find the sliding condition during automatic operation of the automatic screw machine, you need to check whether the electric torque is suitable for the torque range of the current lock screw. It is recommended to use the torque meter to retest the torque. At the same time, check the screw size, specifications, and quality.

    The second measure: If the automatic screwing machine malfunctions, it may be a problem with the screw feeder or the screw sensor. At this point, you need to check whether the screw feeder has screws or not. Check whether the screws are working properly and observe whether the screw sensor is bright. If there is no light, it means the sensor is abnormal.

    The third measure: When you find that the auto-fighting automatic screw machine has floating lock phenomenon, you need to check whether the locking height in the procedure setting in the program reaches the actual locking position of the screw and whether the locking speed parameter setting is correct. At the same time, it is also necessary to check whether the locked product is defective.