Explain how to handle soldering iron

As we all know, if the soldering iron is tinned, it will directly affect its use. This requires us to use methods to prevent it from tinning in the usual maintenance process. This requires us to deal with both prevention and resolution.

Tin soldering iron tip

1. Remove iron oxide, dirt, or flux from the tip of the soldering iron before powering on the tip of the iron; remove impurities from the heating element to prevent the soldering iron tip from jamming with the heating element or sleeve.

2. When the temperature is used, the temperature should be set at about 200°C. When the temperature is reached, it should be set to 300°C.

3, in the welding, the iron tip can not be hard to pick or squeeze the welded object, can not be welded by friction.

4. Do not rub the iron tip with a rough surface, nor add any compound to the tin surface.

Solve soldering iron

If the tip has been tinned, gently wipe it with 600 to 800 mesh sandpaper, and then use a tin wire containing flux to wrap around the tinned surface of the wipe. Allow it to warm up and then re-add tin.

Above we have introduced how to deal with the situation of soldering tin soldering tin from prevention and solution. I also hope to help everyone.