Add：Songgang Street Tian Yang
Road, head south Technology
Park, Building A, 7th Floor
Automatic screw machines are non-standard devices that screw the screws onto the equipment. The types of screws vary greatly and the product style varies greatly, which brings many challenges to the design, manufacture, and debugging of the screw machine.
The first is to send screws, what kind of screw to send it, the length of the screw must be greater than 1.2 times the diameter of the screw, or the screw is easily reversed, the screw cap is too thin is not good, easy to superimpose, so stuck in the direct vibration track In the self-tapping screws, they are more likely to get stuck in the track than screw threads.
When the lock is paid, it is easy to lock the Phillips screw, and then the hexagon and the word, difficult to lock is a word, so when the lock screw must understand the type and style of the screw and then design the product . Many of the customer's products, with their use of a solid-shaped screw or a cross, do not affect the product itself. However, because this is not known, the intangible cost of a custom lock screw machine is increased.
There are several reasons for screw jams. There are several reasons, one is that the screws are not standard, there are big ones, or there are burrs, so that the screws are not smoothly conveyed. In addition, the screws in the vibrating plate are arranged in the vibration plate after The reason for this is the track is too wide, the track is too wide, the screws are stacked diagonally, or the vibrating plate feeds too fast, and the feeder requires less screws and the vibrating plate does not stop, which can get stuck inside.