CSD30X ion wind bar

★ The rate of static elimination is related to the air flow rate, so high-speed static elimination must increase the air flow.

★Using high-frequency AC mode, frequency up to: 68000Hz.

★ automatic ion balance system, in addition to static electricity faster.

★ The power supply uses side wiring to ensure front and rear space.

★ Equipped with static electricity normal operation indicator and high voltage abnormal operation indicator.

★ The maintenance time can be set according to the workshop environment. (Time: 0-999 hours freely set, refer to the set time in the manual)

specification:

Input voltage: DC24V±5%

Ion generation method: Corona discharge method

LED indication: H.V (green) High pressure uptime indicator is on

                    ALARM (red) is abnormally discharged, and the indicator lights when the circuit is abnormal (overcurrent)

                    CLEANIKIG (yellow) Lights up when the cleaning timer is set, and the buzzer alerts

Voltage application method/applied voltage: High-frequency AC method/±2200V

Ion balance: Within ±15V (measurement distance 300mm, supply pressure 0.3MPa)

Static elimination time: 1.0s (measurement distance 300mm, supply pressure 0.3MPa)

Cleaning timer setting time: Can be set in the range of 0-999 hours

Ozone generation (ppm): 0.1ppm or less (measurement distance 50mm, supply pressure 0.2MPa)

Use gas: Air (clean air with moisture and oil removed)

Gas pressure use range (MPa): 0.01-0.45MPa

Ambient temperature: Indoor 0-40°C

Ambient temperature: 15-75% Rh (without condensation)